Product Description
KITSEN 3D Early Striping Slab Form is a flexible steel beam-plywood-prop slab formwork, which is perfect for slabs in building construction, with lots of beams and irregular geometry and spans between columns, and high demands for finishing quality.
Product Parameters
| Product Name |
KITSEN 3D Early Striping System |
| Material |
Steel, Birch Plywood |
| Components |
Primary Beam |
1.5m, 1.8 m, 2.4m |
| Secondary Beam |
2m, 2.3m |
| Prop |
1.8-3.2m, |
| Drophead |
0.76m |
| Ledger |
0.9m, 1.2m, 1.5m, 1.8m |
| Extension |
1.5m |
| U Head |
0.6m |
Advantages
High assembly efficiency: One worker can assemble 25`50m2 per day. Slabs of up to 600mm thickness, depending on grid size in use.
Grid Size
(m) |
1.8*1.8 |
1.8*1.5 |
1.5*1.5 |
1.5*1.2 |
1.2*1.2 |
1.2*0.9 |
| Concrete Thickness(mm) |
150 |
200 |
300 |
400 |
500 |
600 |
The form face provides superior concrete finishing. Beams recoverable in 5 days, only the props with crown and slim plywood remain as load-bearing items.It provides tidy and clean construction site with large space between props for workers' free pass. No crane needed, all beams can be transited to next floor via a small hole.3D Early Striping Slab Formwork Height: No Restriction, Can be adjusted by changing the shorings
Product Assembly Description
Check that all components are on site, undamaged and that they are functioning correctly - (refer to Checklist and Quantity Schedules). Damaged or incorrect components shall not be used.
Project Case: Lichunmiao Project
All KITSEN scaffolding and formwork products will be covered by RMB10,000,000.00 product liability insurance.
Audited Supplier 
){kind=link}