Product Description
KITSEN Fastform is an advanced aluminum panel-prop-formwork system which allows early stripping operation.No Restriction, Can be adjusted by Changing the Prop.
Product Parameters
| Product Name |
Kitsen Fastform System |
| Material |
Aluminum Alloy 6061-T6, Birch Plywood |
| Basic Components |
| Panel |
1800×1200mm |
| Filler Beam |
1800/1200/900/600mm |
| Truss |
1800×600mm |
| Others |
Prop, Lock Pin, Guardrail Post, Cantilever Support Brace |
Advantages
Fast &Efficient-
- Modular components, beam and panel are made of aluminum which is light enough to erect, strip and disassemble.One worker can assemble 27m2 per hour, and dismantle 54 m2 per hour. (One worker can install 100m2-140m2per day.Allowable concrete thickness ≤300mm.Birch plywood thickness:10mm.
Safe&Reliable-Stable system with 6-direction locking restrictions
Simple-Only three basic components: panel, crown, prop
Product Parameters
Product Assembly Description:
1.Check that all components are on site, undamaged and that they are functioning correctly - (refer to Checklist and Quantity Schedules).
2.Damaged or incorrect components shall not be used.
3.Make sure the panel is clean before assembly.
4.Handle panels with care during transit, avoid bumping and collision.
5.Do not hit, pry and drop panels roughly when stripping.
6.Assort and pile up panels properly. Handle panels with care.
7.Keep in mind that the maximum safe working load capacity is 13.75KN/ m2 .
Audited Supplier 
){kind=link}